Archive for the ‘Construction Equipment’ Category
Monday, January 19th, 2009 |
You must have seen a backhoe loader, but may not know that it is called a backhoe. Whenever a building is being made or roads are dug it is used to lift chunks of earth. It is actually a machine used for excavating. It is a device which is attached to the rear side of the tractor. It lifts heavy stuff like earth or any other heavy load.
It is very expensive and if you have a one time need for it then instead of buying it you can take it on rent. It has got its name because the scooper type bucket that is placed at the rear side of the tractor. It performs the work that a bulldozer does. The device is mounted on a tractor. The biggest advantage is that it can be taken directly to different areas, whereas other heavy machinery for sale have to be towed into the work area. Hence these other machines need outside power sources.
It needs a lot of operator’s skill to operate it. An inexperienced operator will not be able to use it.The design of the backhoe is like a human hand/arm is extending to scoop something or to keep something. Thus, to operate it you need a lot of skill and expertise.
Nowadays backhoes are run on hydraulic method. They are like buckets attached to the rear of the tractor and it is a device which is attached the rear side of the tractor. It lifts heavy stuff like earth or any other heavy load. There are three parts of it and it is the first part of the machine.
The second part is called a loader. It is in the front side of the tractor. A big rectangular shaped (most of the time) device which scoops material etc. It is not supposed to be used for digging. It can be replaced with devices to get a street sweeper and if required even a pallet fork.
The main part of a backhoe is the tractor. It is the main machine. There is seat and the person operating it can move 360 degrees so that he may reach all the controls. There are different sets of control for the backhoe and another set of controls for the loader. It can move over rough areas and has rugged tires and an engine which is run on diesel.
Hence, all these three parts, the backhoe and the tractor and the backhoe loader do the job together. They all have different functions and work together in getting the task accomplished. Backhoes can be taken anywhere in a construction equipment site some of them are so designed that the front and the rear parts can be interchanged with other instruments like a hydraulic hammer or an auger or may be a grapple even an asphalt grinder.
Posted in Construction Equipment | No Comments »
Wednesday, December 31st, 2008 |
Sometimes it’s better to think twice before spending a lot of money on new heavy equipment for sale or construction machinery. You can save an large amount of your investment funds by buying used machinery. But before you get to make such a decision you might want to think it through.
Used heavy equipment might be a solution for your business as long as you make sure the used machinery works as it should. Of course, it is used, but used machinery is typically refurbished and has technical reviews. But perhaps your personal experience is better than all that criteria. Even if the used machinery looks just fine, famous brand manufacturer like Bobcat equipment, Case IH equipment, Caterpillar equipment, Claas, Fiat-Hitachi, Fendt, Ford, Hitachi, Ingersoll Rand, JCB, John Deere, Komatsu, Leibherr, Link-Belt, Massey Ferguson, Steyr, Valtra, and Volvo or the seller convinced you about the quality of his or her used machinery, you should get try to test it before you buy it. Always try to test the used machinery before you buy it or have someone to test the used machinery for you. Scrape, used dig, used lift, used dump, pump, crane, whatever the vehicle has function for. Go through all the used machinery functions and they all work.
Visual inspection is another way of checking the used heavy equipment. Even if you have already made up your mind about buying used heavy machinery, you should be entitled to a good bargain. And a good bargain means you get good quality used heavy equipment for less. Take your time inspecting the used heavy equipment, and try to cover all the important areas. Used heavy equipment paint quality is not critical. However rust is an issue, so try to see if there are any rust patches or holes covered just for “cosmetic” reason. Grab a tool and try pushing or even hitting on suspected areas of the used heavy machinery to see if there is any rust falling on the ground. Slide under the used machinery and search for leaks. Test the possible leaking problem of the used machinery after you’ve been through the test drive. Also check valves and hoses before the test drive, and see after it if there are any leaks present in these places.
The testing shouldn’t stop here. Listen to the engine running for more than a minute or two. Also listen to the hydraulics when the used heavy equipment is performing its special duties. Try to detect any kind weird smells like burning oil or electrical short circuits. When you get behind the wheel or the levers, try to feel if the controls work as they should. However, you should keep in mind one thing: even the new heavy equipment may be faulty at times, which is why you should be prepared to face all problems that may arise with your used machinery, and not just assume the problem was caused by the fact that the machinery was old.
As a final advice on your shopping adventure for used heavy equipment, try to avoid buying from individuals that have no knowledge of construction equipment. Construction equipment dealers can often provide maintenance service and warranty with your used heavy equipment that can stretch from 30 to 60 days, making sure that unexpected problems will be dealt with professionally.
And, of course, don’t forget to negotiate the price of used heavy equipment. You can find a dealer that is flexible with pricing and negotiation and give you a better deal that a private owner. Good luck shopping for used machinery.
Posted in Construction Equipment | No Comments »
Wednesday, November 19th, 2008 |
Since 1990, Hoss Equipment Company has been a leading independent global dealer of large new and used heavy construction and mining equipment. We provide new, rebuilt and used heavy equipment solutions for highway construction, mass excavation, landfill, quarry/aggregate, coal mining and other surface mining applications including precious metals.
Hoss sales professionals have more than a century of combined experience in the heavy construction equipment and mining equipment industries and will provide you with the information you need, the equipment selection you expect and the “one company, one call, one total solution” peace of mind you deserve.
We specialize in medium-to-large units including crawler-tractors, off-highway dump trucks, mass and hydraulic excavators and shovels, wheel loaders, motor scrapers, motor graders, off-highway water equipment, and compactors. Whether you need a single piece of equipment or an entire fleet, we can provide you with reliable earth-moving equipment that can be custom configured with the features you need. Our inventory includes only the finest in earth-moving equipment from Caterpillar equipment , Hitachi, Dresser, Komatsu, Euclid, Terex, Link-Belt, O&K, Klein, and more. We have the inventory you need in-stock today.
Posted in Construction Equipment | No Comments »
Tuesday, November 4th, 2008 |
The secret behind running a successful construction business heavily lies on using the best construction equipment. Realizing this truth, the world’s best construction companies possess high-class construction equipment. Construction equipment is the best ally that a company can depend on. This equipment facilitates and provides the best assistance when working against a tight deadline. Some common construction equipment needed for any construction business includes bulldozers, wheel loaders, backhoes, pavers, excavators, cranes, and tractors, rollers, forklifts, trucks, generators, pressure washers, welders and air compressors.
Well-known companies such as John Deere, Volvo, Caterpillar, New Holland, Bell, Komatsu, Bobcat, Terex, Kawasaki, Hyundai and International Harvester manufacture construction equipment. They are the most popular and well known construction equipment manufacturers. These companies are known for making high quality construction equipment. Parts for construction equipment are as vital as the equipment themselves. Any breakdowns during work will seriously affect the work schedules.
Stocking vital equipment parts in adequate numbers will help in executing the projects on time. New parts or reconditioned parts are important equipment and should be in stock, as sourcing them at the time of break down would prove difficult and expensive. Many companies offer genuine high quality parts. Often they guarantee for high performance and long life. Keeping enough stock in their warehouse to meet any demand will be beneficial. Normally, most reputed manufactures have remanufacturing programs that takes failed components, fixes them, tests them, and then sells them as used parts.
Most of these parts will be like new ones and adhere to original specifications. This is a cost saving method for buyers without compromising the quality and contributing to environmental protection by reducing waste. Major Construction equipment manufacturers have distribution networks that help buyers to get the parts as and when possible without wasting time which is crucial for their business. Online support systems help them in locating and transferring the parts which are in great demand in one place but lying idle in another place without any buyers.
Posted in Construction Equipment | No Comments »
Thursday, October 2nd, 2008 |
Major pieces of new and used construction equipment for sale like backhoe loaders don’t come cheap: they’re built for reliability and toughness. Before you develop a case of sticker shock, consider that you’ll be using your new backhoe loader for 10 years or more, and the upfront cost won’t seem quite as high.
Typical prices for a base-model 14′ digging depth backhoe, the industry standard, with an average 80 or 90 horsepower (hp), range from $55,000 to $75,000. 15′ to 16′ models go for $75,000 to $90,000, and those over 16′ can average around $110,000. Compact backhoes in the popular 9′ to 10′ range are most often in the $25,000 to $35,000 range.
Options like four-wheel drive, automatic transmission, and sideshift can quickly raise your total costs — but if those options are important to your planned use of the machine, they’ll pay for themselves in improved efficiency. Also count on paying an extra $1,000 to $2,000 for each specialized attachment you purchase like a 4 in 1 bucket or crusher.
Dealers often offer subsidized financing from the equipment manufacturers, helping you get a good deal on purchase financing. Leasing is a good option when interest rates are high, but while interest rates are relatively low, you’re better off purchasing outright.
Backhoe loaders can also be rented by the day, week, or month. Daily rates range from $150 to $500; weekly rentals are typically $600 to $1,500; and monthly rentals average around $2,000 to $3,000.
Buying used backhoe loaders
Due to these steep prices, you may want to investigate used backhoe loaders for sale. Take into account your schedule flexibility when deciding whether or not to buy used. If you lose the use of the backhoe for a week due to repairs, will that throw off your schedule completely, or can you take it in stride? You should also ensure that you’re buying from a reputable dealer, as you’re more likely to need their help for repairs.
Prices drop considerably once the machines have a few thousand hours of use on them. For example, used backhoe loaders with 14′ backhoes and 2,000 hours of use can be found for around $30,000. Choose a machine with even more hours and you can drive the price down even further.
However, you’ll need to be careful about maintenance costs. A few dings and some peeling paint might not matter to you, but a failing transmission certainly will. Make sure you take the loader for a test drive and do some loading and digging with it to gauge its performance.
Posted in Construction Equipment | No Comments »
Wednesday, September 17th, 2008 |
The backhoe is one of the most innovative pieces of modern technological construction equipment. In fact, if you go to any construction site you’re almost assured to find at least one backhoe there. This is because they are versatile, flexible, and come with a wide arrangement of attachments to help with digging and excavation.
The common misconception is that it is called a backhoe because the shovel is mounted to the back of the tractor. This is simply not true. In fact, skid steer loaders a type of backhoe have their bucket mounted in the front. The reason it is called a backhoe is because of the action the shovel takes. Compare how a bulldozer digs forward and up. A backhoe, on the other hand digs by dragging the shovel through the dirt in a backwards motion.
Backhoes are not just confined to construction sites. In fact, they are perfect tool for many different landscaping options. In addition, certain hydraulic powered attachments make them great instruments for demolishing old buildings, penetrating rock and cement, picking up and moving heavy objects and much more than just digging trenches.
In fact, when it comes to small and medium landscaping projects, it is often the only heavy piece of equipment that is needed, since it has the ability to work like a bulldozer and excavator as well.
Additionally, what makes a backhoe convenient is the fact that you can drive it directly to your job area, instead of towing it or transporting it with another vehicle. This is due to the fact that it has a diesel powered engine.
Operating a backhoe is not the easiest thing in the world. First of all, you have functions that control both the front end loader as well as the backhoe bucket. You need to be able to simultaneously drive and direct the tractor, while working the joystick control for the equipment and attachments.
There is no better tool to dig a trench than a backhoe. In fact, a trench can be dug in as little as 15 minutes, when a skilled operator is behind the wheel.
Posted in Construction Equipment | No Comments »
Friday, September 12th, 2008 |
Caterpillar offers a full line of construction equipment including backhoe loaders, designed to fit the needs of the building construction contractor. Our goal is to produce equipment that offers you better value through increased performance, reliability and quality.
Differentiating Features
The new Caterpillar E-series backhoe loader range, models 422E, 428E, 432E, 442E, 434E and 444E have a number of new and enhanced features based on feedback from customers, and the Caterpillar commitment to delivering lower owning and operating costs, and increased reliability.
The E-series range has been significantly widened to provide increased choice for Cat customers around the world. The 422E, for example, is a classic backhoe loader, built to perform traditional work tasks, around the clock, in tough conditions. At the other end of the spectrum, there is the all new 434E and 444E, which bring new levels of power and performance to the Cat backhoe loader range.
The new load-sensing, flow sharing hydraulics and an improved backhoe design and geometry, offer greater control and a ten percent increase in loader breakout performance. A new slider frame design has the option of a powered side shift, and the new outer sliding E-stick delivers extended reach and digging performance, while reducing maintenance and repair costs. The E-series cab is one of the large in the industry helping to create a comfortable working environment. Every model has an on road speed of 40 kph.
Posted in Construction Equipment | No Comments »
Thursday, September 11th, 2008 |
The Swedish company known for its safe cars and reliable trucks has recently announced that they will be expanding their presence in India. This announcement is not connected to the automobile market but the commercial equipment market. The company is planning to produce construction equipments, and road development machines in India.
The announcement came after the second largest truck and bus manufacturer in the world acquired Ingersoll Rand’s road construction equipment division recently. Volvo acquired the division for $1.3 billion from the diversified industrial firm. The division has an assembly facility in Bangalore, India and this is where Volvo is planning to manufacture their products.
Eric Leblanc, the managing director of Volvo India Private Limited, announced that the manufacturing facility will be producing Volvo-branded equipments in the near future. Equipments initially pointed out by Volvo to be manufactured at the said facility are excavators and loaders. These equipments will be sold in the Indian market.
Leblanc also pointed out that they are in the process of fusing the operation of the IR division and their own. When the process is completed, it is expected that the manufacturing plant will be producing Volvo-branded equipments.
“We have completed the acquisition transaction globally a month ago and are currently integrating the sales and distribution of road machinery business of IR with Volvo,” said Leblanc. “We do intend to use their plant to produce other global construction equipment products in India.”
Leblanc claimed that the presence of an engineering base in India will cut down the price of equipments they are planning to market in the country. The engineering base will also help Volvo increase its presence in India while at the same time giving them a head start in coping with the local employees. The brand Volvo will be used on equipments that will be produced by the Ingersoll Rand manufacturing facility.
“Over the next 12 months we will launch new range of products. We already have road development machines in our portfolio like motor graders which will be further expanded,” said Leblanc. This shows Volvo’s dedication to expanding their presence in the Asian country.
Aside from the planned excavators and loaders, Volvo is also thinking about the development and production of heavy road construction equipments and other road making machineries. The expansion of their offering in the Indian market will increase their share of the market. Currently, Volvo has a 13 percent share in the excavator range market. The company has sold 800 machines like excavators, wheel loaders, and graders which amounted to about $100 million. With the increase in production capacity, Volvo looks to produce and sell more equipment such as that in the country resulting to higher profits.
“Right now we don’t have any production capacity for excavators in India. We import excavators from Volvo’s Korean plant and sell in India. We are looking to manufacture excavators in India but as of now no decision has been taken in this regard. There is a potential to make them in India,” said Leblanc. It is also expected that Volvo will offer discount Volvo parts for their trucks in India.
The company is expecting that the demand for vehicles that they will produce will increase as the Indian government focus on infrastructure projects. For now, the Swedish company estimates that the road construction equipment market all over the world is worth $4 billion per year.
Posted in Construction Equipment | No Comments »
Monday, September 8th, 2008 |
Dump Truck Equipment Leasing may fall under the more general leasing category of Heavy Equipment Leasing or Commercial Equipment Leasing. Dump trucks are classified as heavy equipment like bulldozers, backhoes, and excavators. The numbers show that more than $3 billion in construction equipment like dump trucks are leased annually by US companies alone.
Some companies opt for Dump Truck Equipment Leasing because they are trying to expand the business and need their existing cash flow for this. Others may choose Dump Truck Equipment Leasing because their existing equipment suddenly failed to function so they need functional equipment quickly to keep operating. Dump Truck Equipment Leasing is also good for companies that want to gain a financial edge over their business rivals by being able to reap savings thru leasing equipment. Dump Truck Equipment Leasing would probably appeal to contractors in the construction business that will always need dump trucks.
If you just plain smart about choosing a lender, you might be able to get a Dump Truck Equipment Leasing arrangement customized to your business situation. This is very important because businesses may experience different business cycles, and cash flow patterns, while company owners may have different ideas of what constitutes as a sufficient budget. Construction projects are sometimes seasonal in nature, so you need a Dump Truck Equipment Leasing arrangement which can give you the flexibility of adjusting payments to the months when business is peaking and you can afford the payments on the Dump Truck Equipment Leasing arrangement.
Some lenders may offer a very quick processing time which gives company owners who are in a hurry an advantage for acquiring their dump trucks quickly. If you have the right documentation on hand, you could find yourself signing your Dump Truck Equipment Leasing contract fairly soon after submitting the leasing requirements.
Be sure though that the leasing options the Dump Truck Equipment Leasing arrangement you enter into has the right provisions you were seeking. Also, verify with your company accountant if your corporate income stands to gain via deductions from such a Dump Truck Equipment Leasing arrangement. This would probably be dependent on some tax laws or business tax conditions that only accountants may be updated about. Also examine the Dump Truck Equipment Leasing arrangement for the presence of soft costs.
Posted in Construction Equipment | No Comments »
Tuesday, September 2nd, 2008 |
Hyundai Construction Equipment is a leading provider of heavy duty excavation equipment like wheel excavators and loaders. Wheel excavators are available in different configurations with numerous optional features to be used in a wide number of applications.
The R170W-7 model has an arm flow regeneration system, boom and arm holding system, pump flow control system and maximum flow cut off systems that have been designed with the latest technology and can be centrally monitored. Hyundai Construction Equipment also incorporates one touch decel systems with CPU controller, hydraulic dampers in travel pedals, power boost control systems and anti restart and engine overheating systems in its range of excavators. They also come with six cylindered turbo charged Mitsubishi engines that meet EU stage II and EPA tier II emission regulations.
With compact engine size and height, easy access and maintenance through side mounted gear driven camshafts is possible for operators and service personnel. Hyundai Construction Equipment also manufactures wheel loaders that are widely used in the heavy industries. The HL740-7A model comes with a fully integrated electrical system and power train controls like wet disc brakes, torque converter and transmission oil cooler. Hydraulic features include automatic boom positioners, kickouts, and boom lock safety valves.
Posted in Construction Equipment | No Comments »
